Ithegi yeMetal Resistance Ultra High Frequency (UHF1-Tag3)
Inkcazo emfutshane:
I-UHF1-Tag3 yithegi efihliweyo ephindaphindwayo kakhulu yeGranding UHF reader. Ithegi ye-UHF ifanelekile kulawulo lwezithuthi, kwaye umgama wokufunda ikhadi uya kuba ziimitha ezili-10 kwi-UHF1-10E kunye ne-UHF1-10F kwiindawo zokupaka.
Iinkcukacha ezikhawulezayo
| Indawo yemvelaphi | IShanghai, eTshayina |
| Igama lebrand | UKUGQIBELA |
| Inombolo yoMzekelo | I-UHF1-Tag3 |
| Kusetyenziswa kwanjani | Uyilo olunamathelayo, Ufakelo olulula |
Intshayelelo
I-UHF1-Tag3 yithegi efihliweyo ephindaphindwayo kakhulu yeGranding UHF reader. Ithegi ye-UHF ifanelekile kulawulo lwezithuthi, kwaye umgama wokufunda ikhadi uya kuba ziimitha ezili-10 kwi-UHF1-10E kunye ne-UHF1-10F kwiindawo zokupaka.
Iimbonakalo
Indibano Ehlanganisiweyo
Ukumelana nesinyithi
Uvakalelo oluphezulu lweChip
Izicelo eziqhelekileyo
Ulawulo lweZithuthi
Ulawulo lokuQokelelwa kweRhafu yoMgwaqo Omkhulu (iBhulorho)
Iinkcukacha
| Imodeli | I-UHF1-Tag3 |
| I-frequency yokusebenza | 840~960MHz |
| Umgama wokufunda | Ukuya kuthi ga kwiimitha ezili-10 ze-UHF1-10E kunye ne-UHF1-10F (Imiselwa yimeko-bume kunye nomfundi) |
| Iprotocol | ISO / IEC18000-6C, i-EPC global Class 1 Gen 2 |
| Itshiphu | I-G2XM |
| Umthamo weMemori | Iibhithi ezingama-272 |
| Ulwakhiwo lweNdawo yokugcina izinto | I-EPC: 96bits, UID / TID: 64bits, Umsebenzisi: 512bits, Igama lokugqitha lokufikelela: 32bits, Igama lokugqitha lokubulala: 32bits |
| Cima Unyamezelo | Izihlandlo ezili-10,000 (zeetships kuphela) |
| Ugcino lweDatha | Iminyaka engama-20 (Kwiitships kuphela) |
| Iimfuneko zokusingqongileyo | Isatifikethi seRoHS |
| Ubushushu bokugcina | 0~40℃ |
| Umswakama wokugcina | 40%-70%RH |
| Ubushushu bokusebenza | -30~60℃ |
| Ubukhulu | 249 * 13.8 * 18 (mm) ± 0.5 (mm) |
| Ufakelo | Ifakwe kwimiphetho ephezulu nesezantsi yepleyiti yelayisensi (Izicelo zokupaka) |
Amanqaku
1. Ukuze ufumane ukusebenza okugqwesileyo kokuqatshelwa, nceda ugcine ulwalathiso lwethegi lufana nolwalathiso lwe-antenna polarization xa usebenzisa.
2. Ubushushu bokusebenza kufuneka bube ngaphakathi koluhlu oluvumelekileyo, kungenjalo bunokubangela ukuba imveliso isebenze ngendlela engaqhelekanga.
3. Ubushushu kunye nokufuma kwendawo yokugcina kufuneka kube ngaphakathi koluhlu oluvumelekileyo, kungenjalo kuya kunciphisa ubomi benkonzo yemveliso.
4. Musa ukunyanzela ukuba imveliso igobe okanye ibethe imveliso, nto leyo enokubangela ukuba itshiphu yangaphakathi yemveliso yonakale kwaye ilahleke
ukusebenza kakuhle.
5. Umgama ukusuka kwimveliso eyi-50CM akufuneki ube nentsimi yombane okanye umbane onamandla, nto leyo enokubangela ukuphazamiseka kwimveliso.
6. Imveliso ayinakubekwa kwindawo ene-asidi enamandla okanye i-alkali, nto leyo eya kubangela umonakalo omkhulu kwimveliso.
7. Imveliso mayigcinwe kude nemagnethi ukuze igcinwe ukuze kuthintelwe ukulahleka kwedatha.
Uthotho lweKhadi le-UHF
| Imbonakalo |  |  |  |  |
| Igama lomzekelo | I-UHF1-Tag1 (Enekhadi Lokupaka) | I-UHF1-Tag3 | Ithegi yokupaka ye-UHF | Ithegi engangeni manzi ye-UHF |
| Isicelo | Ulawulo lokufikelela kwizithuthi ezizinzileyo zomgama omde | |||
Iithegi ze-UHF zokubhalisa kwiSoftware ye-Access3.5
